OnePlus 13T China (PKX110) – Offiline Flashing Instructions (Stock ROM Approach Firmware Technique)

In the case of your OnePlus 13T China (PKX110) showing signs of a software-related boot loop, bricked state, or corruption, the most effective method is flashing it with the stock ROM. This guide is meant to provide you with the reliable and proven method of restoring your device through the appropriate firmware.

⚠️ Forewarning Before Flashing

As mentioned above, the guide is specifically designed for OnePlus 13T China variant (PKX110).

There is a high likelihood of bricking your device if the wrong firmware is flashed.

It is mandatory to backup the data that is necessary before proceeding (Data, in this case, will be wiped).

Charge your device to a minimum of 50% battery before proceeding to circumvent any unwanted interruptions.

Official OTA Update Method (Applicable if device boots into recovery) )

The device is able to perform recovery mode booting, you have the capability of restoring it through the Official OTA update approach.

Steps:

Obtain the stock ROM for OnePlus 13T (PKX110) from the links mentioned below:

Support page of OnePlus

Alternative sources such as XDA Developers are permissible.

The next step is transferring the ROM file to the internal storage of the device or it can also be saved on OTG USB flash drives.

Boot Into Recovery Mode:

Press and hold the Power and Volume Down buttons until the OnePlus logo appears.

Apply update from Local Storage:

Now select Install from storage (or Apply update from ADB if using a PC).

Find the ROM that has been downloaded, and confirm its installation.

Wait until it is done, then reboot the device.

Method 2: MSM Download Tool (Qualcomm Flash Method – For Bricked Devices)

The MSM Download Tool is the best method when the device is completely unresponsive or stuck in a boot loop.

Requirements:

✔ MSM Tool Firmware for OnePlus 13T China (PKX110) (Make sure its from a trusted source). 

✔ USB Access Drivers from Qualcomm (These are to be installed on the PC).

✔ The latest version of MSM Download Tool. 

✔ Windows 10/11 PC.

Steps:

• Get the MSM tool and extract file
• Get the PKX110 MSM tool firmware, and extract it.
• Install GBPQ Drivers
• Set up Qualcomm drivers on the PC.
• Enable the phone's EDL (Emergency Download Mode)
• Switch off the phone.
• Press volume up, volume down, and power for ten seconds until the screen goes black.
• Connect the smartphone to the computer using USB.
• Open Device Manager to see that it is listed as “Qualcomm HS-USB QDLoader 9008.”
• Open MSM Download Tool as an Administrator.
• Load PKX110 firmware file (.ops or .mbn).
• Press “Start” and for flashing completion (green “Finish” me.
• Switch off the device.
• Now click on Recovery Mode.